Eicon Networks 1530 manual Interface Cables available from Eicon Networks

Interface Cables available from Eicon Networks

The Eicon 1530 can connect to Customer Service Units (CSUs) or Data Service Units (DSUs) which support one of the V.24 or V.35 interfaces, including compatible Eicon Networks Eiconcards (such as the C series) using a V.24 cable.

Note: Two Eicon 1530 devices cannot be connected back-to-back.

The following table lists the most common connections supported by the VHSI port, and specifies the part number of the required Eicon Networks cable. For information on making your own cables, see “Interface Cable Specifications” on page 101.

Interface	Connection		Part #
V.24	to V.24	DCE	300-077
	to V.24	DTE	300-078
V.35	to V.35	DCE	300-076
	to V.35	DCE (France)	300-083

To use an interface, simply connect the appropriate cable. The Eicon 1530 recognizes the cable and automatically configures the port for that interface. Consult the documentation which came with your networking software for more information about port configuration.

Selecting an Interface Cable 100