Web Interface Settings Glossary 71
Connection Menu > DNS Group
Domain Name
When DNS relay is enabled, each DNS request is checked against the name set with this
command. If so, a connection defined by this profile is established, and the request is
forwarded. Enter a DNS domain name (up to 32 alphanumeric characters), or use * to match
any name.
Primary Address
Defines the address of the first DNS server where DNS requests are to be sent, when DNS
Relay is enabled.
In most cases, leave this set to 0.0.0.0. This enables the Eicon1530 to retrieve the correct
address when it connects to the remote site (your ISP for example). In some cases, your ISP
will supply you with an address to use.
Secondary Address
Defines the address of the second DNS server where DNS requests are to be sent. The
secondary server is only used when the PRIMARY does not reply.
In most cases, leave this set to 0.0.0.0. This enables the Eicon1530 to retrieve the correct
address when it connects to the remote site (your ISP for example). In some cases, your ISP
will supply you with an address to use.