Security 56
9.
Once you click ‘Save’, you are returned to the main filter page. The new filter you just defined
is shown in the list. However, the checkbox to the left of the filter definition is empty,
indicating that the filter is not enabled.
10.
Enable the filter by clicking the box that appears to the right of the ‘Edit’ button.
11.
Click ‘Save’. This makes the filter operational.
Note: Unlike other configurations settings, you do not have to reset the Eicon1530 to make filters
operational.
‘Edit Filters’ Page Options
Action
• ‘Drop’: Discard data that matches the filter definition.
• ‘Forward’: Send data that matches the filter definition to the filter output.
• ‘Forward if connected’: Send data that matches the filter definition to the filter output, if a
connection is open.
Direction
• ‘incoming’: Data being received by the Eicon1530 originating from the external network.
• ‘outgoing’: Data being sent by the Eicon1530 to the external network.
• ‘all’: Both incoming and outgoing.
The
new
filter
Checkbox