Eicon Networks 1530 manual Displays Hdlc configuration settings

SET HDLC X32SERVICE { TRANSPAC CCITT ERIPAX NONE } [xid[sig]]

Variations of the HDLC protocol expand upon the protocol to provide additional information to the host and client systems. Default: NONE.

NONE: Standard implementation of HDLC.

ERIPAX: A variation of HDLC made to work on Ericsson private networks. The ERIPAX XID helps identify you to other network clients even when you are using a dial-up line.

CCITT: A CCITT standard variation of the HDLC protocol providing parameters to help identify you to other network clients even when you are using a dial-up line.

TRANSPAC: A variation of HDLC made to work on the Transpac network in France. The Transpac ID and SID parameters identify you to other network clients even when you are using a dial-up line.

SHOW HDLC CONFIGURATION

Displays HDLC configuration settings.

SHOW HDLC STATISTICS

Displays HDLC statistics.

SHOW HDLC STATUS

Displays the current HDLC status.

SHOW HDLC TRACE [mask [memsize [framesize]]]

Starts an HDLC trace, or displays an active trace.

mask: 01 I-frames

02 RR frames

04 RNR, REJ frames

08FRMR, SABM, DISC, UA frames

10All other frames

memsize: The amount of RAM reserved to store the trace on the Eicon 1530 WAN Router.

Range: 1-63 KB. Default: 16 KB

framesize: Number of characters to show for each frame.

Range: 64-1024 KB. Default: 64 KB

Note: Note: If entered 0 or nothing the default value will be used.

STOP HDLC TRACE

Stops an active HDLC trace.

Command Line Interface 131