SNMP Commands

SET SNMP NAME name

Defines a name for the Eicon 1530. This information can be retrieved by SNMP agents.

Range: 1-29 characters.

Default: Eicon 1530 WAN Router.

SET SNMP DESCRIPTION name

Defines a description for the Eicon 1530. This information can be retrieved by SNMP agents.

Range: 0-39 characters.

SET SNMP CONTACT name

Defines the e-mail address of the person responsible for the Eicon 1530. This information can be retrieved by SNMP agents.

Range: 0-39 characters.

SET SNMP LOCATION name

Describes the physical location of the Eicon 1530. This information can be retrieved by SNMP agents.

Range: 0-29 characters.

SET SNMP COMMUNITY name

Defines the SNMP community name for the Eicon 1530. The community name acts as a password controlling SNMP read and write access to all Eicon 1530 configuration settings.

Range: 0-31 characters, no spaces.

SET SNMP TRAPADDR ipaddr

Defines the IP address, in dotted-decimal format, of the remote station where LAN Manager will send SNMP traps. All standard MIB II traps are supported.

Command Line Interface

148

Page 148
Image 148
Eicon Networks 1530 manual Snmp Commands