Eicon Networks 1530 manual Log in to the Eicon, See Modify Vhsi Settings on

Step 3: Log in to the Eicon 1530

Whenever you wish to change settings on the Eicon 1530, you must first log in, as shown below.

1.Launch your web browser and click ‘File’, ‘Open’.

2.Enter 192.168.1.1 as the web page to open.

3.Click ‘OK’. You should see the ‘Log in’ page.

Note: If you do not see the ‘Log in’ page, see Troubleshooting on the following page.

4.Click the ‘Log in’ button.

Note: By default there is no password.

5.The main menu should appear, as shown below.

What’s Next?

See Step 4: Modify VHSI Settings on page 17.

Setup 15