ETHERNET Commands
SET ETHERNET ADDRESS hexString
Overrides ands specifies the Ethernet (MAC) address of the Eicon 1530.
This address must be 12 hexadecimal digits separated by colons, commas, or hyphens (11:22:33:44:55:66 for example).
SHOW ETHERNET STATISTICS
Displays Ethernet statistics.
SHOW ETHERNET ADDRESS
Displays the Ethernet address of the Eicon 1530. You must be in the LAN profile to issue this command.
SHOW ETHERNET TRACE [memsize [framesize]]
Starts an Ethernet trace, or displays an active Ethernet trace.
memsize: RAM reserved to store the trace on the Eicon 1530. Range:
framesize: Number of characters to show for each frame.
STOP ETHERNET TRACE
Stops an active Ethernet trace.
Command Line Interface | 125 |
