Cabletron Systems manual BRIM-A6 Add/Delete Entry Screen Commands, Adding a PVC

Chapter 3: Local Management

3.3.6 BRIM-A6 Add/Delete Entry Screen Commands

The following commands appear at the bottom of the BRIM-A6 Add/Delete Entry screen:

Add/Modify

This command lets you add or modify PVCs to the BRIM-A6 Add/Delete Entry screen.

Delete

This command lets you delete PVCs from the BRIM-A6 Add/Delete Entry screen. This command appears only after you add or modify an existing PVC.

Return

This command lets you exit from the BRIM-A6 Add/Delete Entry screen.

3.3.7 Adding a PVC

To add a PVC, perform the following steps:

1.Use the arrow keys to highlight the VPI field and enter a VPI value from 0-3.

NOTE

LM automatically saves entries when you exit the field.

2.Use the arrow keys to highlight the VCI field and enter a VCI value from 0-1023.

3.Use the arrow keys to highlight the AAL Type field and press the SPACE bar until the desired AAL Type appears.

4.Use the arrow keys to highlight the Encapsulation Type field and press the SPACE bar until the desired Encapsulation Type appears.

5.Use the arrow keys to highlight the ADD/MODIFY command.

6.Press ENTER. The “ENTRY ADDED” message appears at the top of the screen indicating that LM has added the PVC.

Page 3-12 BRIM-A6 User’s Guide