Eicon Networks 1530 manual System Requirements

System Requirements

Before you begin, review the system requirements, as outlined below.

If you are connecting the Eicon 1530 directly to a computer, the following is required:

•A 10Base-T Ethernet network interface card, properly installed and configured to use the TCP/IP protocol. A 100 Mbps Ethernet card can be used if the card supports auto-sensing.

•TCP/IP communications protocol configured to obtain its IP address automatically (DHCP client), and not configured to use a DNS server.

If you are unsure about these topics, consult the documentation for your operating system or network adapter for more information.

Web Browser Requirements

The Eicon 1530 is configured via web pages stored on the device itself. To access the web interface, you must be have Netscape Navigator 4 or Microsoft Internet Explorer 4, or later.

Additionally, your Web browser must be configured to connect to the Internet via a local area network (LAN) and not through a proxy server.

An installer for Microsoft Internet Explorer is included on the Eicon 1530 CD-ROM for all Windows operating systems except Windows 3.1. Windows NT 4.0 requires SP3 or later, available from http://www.microsoft.com/.

Setup 12