Specifications

Hardware Features

VHSI (Very High Speed Interface) port, supports V.24 and V.35 interfaces

Ethernet 10BaseT RJ45 port

AUX port (DB9 V.24 serial interface) (currently unsupported)

Power jack

Hard Reset button

Indicators lights

Flash memory for convenient firmware upgrade (if available)

VHSI Port (Synchronous)

36-pin high-density D-type connector

Auto-detection of the following interface types:

V.24 (EIA RS232-C)

V.35

Speeds: 2400 bps to 2048 Kbps, depending on interface

Protocol support: PPP, Frame Relay, X.25, Frame Relay

Indicator Lights

Power status

VHSI port status

AUX port status (currently unused)

Ethernet connector status (located on the connector itself)

Ethernet activity (located on the connector itself)

Protocol support

PPP:

PPP compression (PPP CCP, PPP LZS-STAC, MPPC, Ascend LZS)

Security: PAP, CHAP, MS-CHAP

X.25:

CCITT/ITU compliance: X.25, X.32, and X.121 (1984)

Up to eight X.25 virtual circuits (includes PVCs and SVCs)

PVC and SVC support with inactivity timeouts

Compression (Eicon Stacker, CISCO, Bay Networks)

Frame Relay:

IP over Frame Relay (RFC 2427)

Maximum of 8 DLCI

Routing between DLCI

Congestion management (FECN, BENC)

Extended LSN

Automatic LMI detection

Congestion control (FECN & BECN)

Frame Relay compression (FRF.9)

Introduction

9

Page 9
Image 9
Eicon Networks 1530 manual Specifications