Eicon Networks 1530 manual Displays system information such as firmware version

SET PASSWORD { CLIPASS WEBPASS } password

Defines the password that users need to specify when logging on. The password is case-sensitive, which means ‘PASS’ and ‘pass’ are not the same.

Range: 0-11 characters, no spaces. Default: none (no password required to log in).

You can specify a separate password for the CLI and web interfaces.

CLIPASS: Defines a password for accessing the command line interface.

WEBPASS: Defines a password for accessing the web interface.

SET SYSTEM NAME name

Sets the domain name of the Eicon 1530. This is also the address of the home page of the web-based configuration interface. The text ‘.wanrouter’ is appended to the name you enter.

Range: 1-64 characters, no spaces. Default: eicon1530 (‘eicon1530.wanrouter’).

SHOW COMMAND [ALL]

Displays a list of commands available in the current context.

All commands will be shown if ALL is specified.

SHOW LED STATUS

Displays the current status of the Eicon 1530 indicator lights.

SHOW SYSTEM STATUS

Displays system information such as firmware version.

SHOW VERSION

Displays the firmware version of your device.

SHOW ICMP STATISTICS

Displays ICMP statistics.

ENABLE REMOTE

DISABLE REMOTE

When enabled, allows remote computers to connect to the Eicon 1530 WAN Router and access its configuration interfaces. A remote computer is considered to be any computer that is not on the local LAN. It is strongly recommended that you define a system password if you enable this option.

Default: Disabled.

Command Line Interface 109