Troubleshooting
Symptom | Solution |
|
|
The InV2 does not | Blown fuse, or the power cable is not properly connected. |
power ON | • Check for a bad fuse and check power cable connection |
| |
|
|
Display reads: | The satellite antenna is not connected to the radio. |
No Antenna | • Check the satellite antenna connection to the radio. |
| |
|
|
Display reads: | No satellite signal is being received. |
No Signal | • Check for obstacles over or around the satellite antenna. |
| |
| • Change the vehicle location to eliminate nearby obstacles |
| (bridges, overpasses, tress, buildings, etc.). |
|
|
Audio static or loss of | The FM frequency contains static. |
clarity | • Locate a quiet FM frequency on your vehicle radio and set |
| |
| the InV2’s FM transmitter frequency to match. |
| • If using the InV2’s AUDIO OUT connector, check the |
| cable connections. |
|
|
No sound | The audio cables are not connected, or the vehicle’s FM |
| radio is set to the wrong frequency. |
| • Check the audio cables at the InV2 and the vehicle’s audio |
| system. |
| • Tune the vehicle’s FM radio to the same FM frequency the |
| InV2’s FM transmitter is tuned. |
|
|
76 [ Troubleshooting ]
