Jwin JV-TV2040 manual Open the control panel

BASIC OPERATIONS

These simple steps will enable you to get the best quality sound and image on your closed circuit monitor.

1.Push the power ON/OFF button. The power indicator light comes on.

Power ON/OFF Button

Power Indicator Light

2. Open the control panel.

Control Panel Door

3. Move the function switch to position “CH1” or “CH2” or Auto.

Note:

ƒ	Use CH1 or CH2 when using
	only 1 camera.	CH1/CH2/AUTO switch
ƒ	Use Auto when you want to use 2
	cameras and switch views
	according to your time setting.	Time Selector

ƒSelect the auto switching time.

ƒDon’t forget to remove the camera lens cover.

4.Set the volume

ƒ	To increase volume, turn the	Volume Control
	volume knob (found on the left
	side of the unit) toward you.

ƒTo decrease volume, turn the volume know away from you.

5. Adjust brightness, contrast, and V-	Contrast Control
Hold to improve the image.
Brightness Control
	V-Hold Control

-8-