Allied Telesis AT-WA1104G-10 manual CR00004677, CR00009087, Core, Utility, Disable debug active

Features in 291-04 76

Level 4

CR	Module	Level	Description
CR00004677	Core	4	When the router or switch rebooted, its internal clock lost approximately
			1 second.
			This issue has been resolved. The time loss on reboot has been reduced.
CR00009087	Core, Utility	4	The following issues occurred with the commands show debug active and
			disable debug active:
			■ The command did not adequately warn users if an invalid module number had
			been entered into the active parameter.
			This issue has been resolved. The router or switch now displays an error unless
			the value is between 1 and 142.
			■ The CLI “?” help description for the active parameter listed an incorrect
			number range and also listed modules that cannot be manipulated through
			this command.
			This issue has been resolved. The “?” help description is now correct.
CR00011695	QoS	4	The “?” help description for switch commands that accept a value in bytes (or
			similar units such as kbytes or bytes/s) incorrectly indicated that the units were
			bps. The commands this issue applied to depend on the switch model, but
			include commands such as:
			create qos trafficclass=value maxburst=?
			create qos policy=value dtcmaxburst=?
			set qos red=value start1=?
			set swi port=value bcl=?
			set swi dlfl=?
			This issue has been resolved. The “?” help description now displays the correct
			units.

AR400	AR7x5	AR7x0S	Rapier i	AT8800-	AT-8600	AT-8700XL	x90048-	AT-9900	AT-9800
Y	Y	Y	Y	Y	–	Y	Y	Y	Y

Y Y Y Y Y Y Y Y Y Y

– – – Y Y Y Y Y Y Y

Version 291-10

C613-10488-00 REV G