Allied Telesis AT-WA1104G-10 manual CR00012602, CR00013045, CR00013112, CR00013188, CR00013221

Features in 291-04

77

CR

Module

Level

Description

AR400

AR7x5

AR7x0S

Rapier i

AT8800-

AT-8600

AT-8700XL

x90048-

AT-9900

AT-9800

CR00012602

MSTP

4

If the command set mstp cist port=value was entered with no other

–

–

–

Y

Y

Y

Y

Y

Y

–

parameters, the resulting error message (“One or more parameters may be

missing”) was displayed as an INFO message.

This issue has been resolved. The message now displays as an ERROR message.

CR00013045

SNMP, Core,

4

The MIB object hrSystemNumUsers displayed the number of login users since the

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

TTY

router or switch started up, instead of the number of currently-active login users.

This issue has been resolved.

CR00013112

IP Gateway

4

The blackhole parameter of the commands add and set ip route had no “?”

–

–

–

–

–

–

–

Y

Y

–

help description.

This issue has been resolved.

CR00013188

LACP

4

Previously, when an attempt to add a port to LACP was unsuccessful, the switch

–

–

–

Y

Y

Y

Y

Y

Y

–

displayed an appropriate warning message followed incorrectly by an “operation

successful” message.

This issue has been resolved. The switch no longer displays “operation

successful” when port addition fails.

CR00013221

IP Gateway

4

The output of the command show ip route did not contain any spaces between

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

the route tag value and the metric value when the tag value was long.

This issue has been resolved by adding the missing spaces. The content and

relative position of the values have not changed.

CR00013260

TACPLUS

4

If a user added a TACACS+ server when TACACS+ was not enabled, previously

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

the router or switch displayed a single “info” message that indicated that the

module was not enabled, but did not display a message confirming the server

addition. However, the router or switch did add the server.

This issue has been resolved. TACACS+ is now consistent with other modules—

the router or switch displays the following “warning” and “info” messages:

Warning (2111049): The TACP module is not enabled.

Info (1111003): Operation successful.

Version 291-10

C613-10488-00 REV G