|
|
|
|
| Enabling and Installing this Release | 2 |
|
|
|
|
|
|
|
Models | Series | Release File | Date | Size (bytes) | GUI file |
|
|
|
|
|
|
|
|
24 July 2007 | 4587048 |
| ||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
24 July 2007 | 4884216 | - |
| |||
|
|
|
|
|
| |
|
|
|
|
|
|
|
24 July 2007 | 4884216 |
| ||||
|
|
|
|
|
|
|
24 July 2007 | 3988344 |
| ||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
Caution: Using a maintenance version on the wrong model may cause unpredictable results, including disruption to the network.
This maintenance release note should be read in conjunction with the following documents:
■the Release Note for Software Version 2.9.1, available from www.alliedtelesis.co.nz/documentation/relnotes/relnotes.html, which describes the new features since Version 2.8.1
■your router or switch’s Document Set for Software Release 2.9.1. This document set is available on the
Caution: Information in this release note is subject to change without notice and does not represent a commitment on the part of Allied Telesis, Inc. While every effort has been made to ensure that the information contained within this document and the features and changes described are accurate, Allied Telesis, Inc. can not accept any type of liability for errors in or omissions arising from the use of this information.
Enabling and Installing this Release
To use this maintenance release you must have a base release license for Software Release 2.9.1. Contact your distributor or reseller for more information about licences. To enable this release and install it as the preferred release, use the commands:
enable
set install=pref
where xx is the prefix to the filename, as shown in the table on page 1. For example, to install the release on an
enable
set install=pref
Version
