Allied Telesis AT-WA1104G-10 manual CR00017226, CR00017227, CR00017255, CR00017256, CR00017337

Features in 291-08

17

CR

Module

Level

Description

AR400

AR7x5

AR7x0S

Rapier i

Rapier w

AT8800-

AT-8600

AT-8700XL

x90048-

AT-9900

AT-9800

CR00017226

IPsec

2

If an IPsec tunnel with no encryption (NULL) was negotiated in AlliedWare

Y

Y

Y

Y

Y

Y

-

-

-

-

-

over NAT-T, the ESP packets did not contain an RFC 3948 compliant

checksum. This means that some vendors may have discarded packets sent

by the AlliedWare peer over such a tunnel.

This issue has been resolved.

Note the null encryption is useful for debugging the traffic over an IPsec

tunnel and should not be used in a working IPsec solution.

CR00017227

IPsec

2

An IPSec checksum recalculation error occurred with UDP traffic when the

Y

Y

Y

Y

Y

Y

-

-

-

-

-

ESP encapsulation was added.

This issue has been resolved.

CR00017255

Switching

2

Previously, trunk members were given the STP state in hardware of port 1,

-

-

-

Y

Y

Y

Y

Y

-

-

-

instead of having the STP state of the lead port in the trunk. The software

state (as displayed with the command show stp port) was correct.

This issue has been resolved.

CR00017256

Switching

2

When using multi-homed IP interfaces on a VLAN, it was possible that L3

-

-

-

-

-

-

-

-

Y

Y

-

hardware switching would stop for all multi-homed interfaces on that

VLAN, if one of the multi-homed interfaces was removed or went into an

administratively down state.

This issue has been resolved.

CR00017337

Switching

2

It was possible to set up a classifier that matched MPLS frames at layer 2,

-

-

-

-

-

-

-

-

Y

Y

-

but the switch would not correctly match these MPLS frames against the

classifier.

This issue has been resolved. The switch now correctly matches MPLS

frames against such a classifier.

Version 291-10

C613-10488-00 REV G