Allied Telesis AT-WA1104G-10 CR00010136, CR00012230, CR00012493, Igmp Proxy, Using igmpproxy=off

Features in 291-04

68

CR

Module

Level

Description

AR400

AR7x5

AR7x0S

Rapier i

AT8800-

AT-8600

AT-8700XL

x90048-

AT-9900

AT-9800

CR00010136

IP Gateway

3

If an IP interface was added and deleted many times, an excessive number of

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

memory buffers became full.

Also, when an IP interface was deleted, the IGMP query timer (set ip igmp

int=interface querytimeout=value) sometimes continued running and later

caused the router or switch to reboot.

These issues have been resolved.

CR00012230

IP Gateway

3

When running the boot ROM release, it was possible to configure the router or

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

switch as a DHCP client by using the command add ip interface=int ip=dhcp.

However, the boot ROM release does not include the DHCP client feature, so the

router or switch did not receive an IP address via DHCP.

This issue has been resolved. It is no longer possible to configure the router or

switch as a DHCP client when running the boot ROM release.

CR00012493

IP Gateway,

3

Where IGMP proxy is enabled, only one upstream interface may be defined.

Y

Y

Y

Y

Y

Y

Y

Y

Y

–

IGMP Proxy

Previously, when the command add ip interface=int ip=ipadd

igmpproxy=upstream was used to try to create a second upstream interface,

an error message was correctly displayed. However, the interface was still added,

using igmpproxy=off.

This issue has been resolved. The second interface is no longer added if this error

occurs.

Also, if an interface had been set as the upstream interface and was later

changed to a downstream interface, a different upstream interface could not be

specified, even though there was no active upstream interface.

This issue has been resolved.

Version 291-10

C613-10488-00 REV G