Allied Telesis AT-WA1104G-10 manual CR00012585, CR00012832, CR00012858, CR00013150

Features in 291-04

69

CR

Module

Level

Description

AR400

AR7x5

AR7x0S

Rapier i

AT8800-

AT-8600

AT-8700XL

x90048-

AT-9900

AT-9800

CR00012585

User

3

When authenticating users via RADIUS, the number of times that the router or

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

switch attempts to contact the RADIUS server is determined by the Server

Retransmit Count (displayed in output of the command show radius).

Previously, this count incorrectly included the initial request. For example, a

Retransmit Count of 3 meant that up to 3 attempts were made to contact the

server.

This issue has been resolved, so that the Retransmit Count no longer counts the

initial request. For example, a Retransmit Count of 3 now means that up to 4

attempts are made to contact the server.

CR00012832

BGP

3

When the router or switch had thousands of static routes and BGP static import

Y

Y

Y

Y

Y

–

–

Y

Y

Y

was periodically turned on and off, BGP used an excessive number of memory

buffers. Excessive buffer use could also occur with BGP in other rare

circumstances.

This issue has been resolved.

CR00012858

DHCP

3

Previously, it was not possible to have multiple static DHCP entries with the same

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

client ID (MAC address), even if the static entries were for different DHCP ranges.

This issue has been resolved. You can now add static DHCP entries for a given

MAC address to multiple ranges. Note that you cannot have multiple entries for

a given MAC address on the same range.

CR00013150

File

3

If a boot configuration script included a command to delete a file followed by a

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

command to create a file of the same name, a fatal exception occurred when the

router or switch ran that script on reboot.

This issue has been resolved so that the fatal exception no longer occurs.

However, you should avoid putting such file operations into boot configuration

scripts. To enhance multi-tasking, the file handler performs file operations in the

background. This is not possible when executing a boot configuration script, so

the file operations may be queued until after boot-up. In this case, this means

that the file deletion will not be finished before the file creation command tries

to execute.

Version 291-10

C613-10488-00 REV G