Allied Telesis AT-WA1104G-10 manual Pim, Show config dynam or saved by the command create config

Features in 291-08

20

CR

Module

Level

Description

AR400

AR7x5

AR7x0S

Rapier i

Rapier w

AT8800-

AT-8600

AT-8700XL

x90048-

AT-9900

AT-9800

CR00017731

IP Gateway,

2

When the DHCP server was enabled on a router or switch that also had a

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

DHCP

local IP interface defined by using the set ip local command, outgoing

DHCP server packets would use the set ip local command's IP address as

their source address. Furthermore, if the broadcast flag was set to TRUE in

the DHCP Discover message that the server was replying to, then the server

would send the DHCP Offer packet out the wrong IP interface with the

wrong source IP address. Microsoft Windows Vista has the broadcast flag

set to TRUE.

These issues have been resolved. The DHCP server configuration now

ignores any local IP interfaces set by using the set ip local command, and

the server now sends the Offer message out the interface that it received

the Discover on.

CR00017749

Switching

2

If a multicast route had an odd number of downstream interfaces attached

-

-

-

-

-

-

-

-

Y

Y

-

to it, and the last downstream interface was deleted, the second to last

downstream interface could experience a loss of packets.

This issue has been resolved.

CR00017816

PIM

2

PIM would sometimes start forwarding duplicate packets from the RP to

Y

Y

Y

Y

Y

Y

Y

-

Y

Y

Y

downstream interfaces if the SPT Bit had been set and had become unset.

This issue has been resolved.

CR00017906

VLAN, MSTP

2

If ports were removed from a VLAN and MSTP was enabled, then the port

-

-

-

Y

Y

Y

Y

Y

Y

Y

-

removal was not included in the configuration displayed by the command

show config dynam or saved by the command create config.

This issue has been resolved.

Version 291-10

C613-10488-00 REV G