JVC AV32P10EK, AV32L5EK, AV32P10EI, AV32L5EI specifications Other menus, Using the ACI function

Other menus

■Using the ACI function

This TV has an ACI function which decodes the ACI (automatic channel installation) data.

Using the ACI function allows all TV channels transmitted from the cable TV station to be properly registered quickly, using the data from the cable TV station.

Caution:

If your cable TV station broadcasts ACI data and if “ACI START/ACI SKIP” appears in the AUTO PROGRAM menu, the ACI function is enabled. In all other cases, it is disabled.

1 Press the 6 button to choose ACI START. Then press the abutton to start the ACI function

When you don't want to use the ACI function:

Press the 6 button to choose ACI SKIP and then press the abutton.

If the AUTO PROGRAM menu changes to another menu:

Depending on your cable TV station, there may be a broadcast selection menu set up by the cable TV station.

Follow the menu instructions and use the 5 and 6 buttons to operate the menu. After you have made the setting, press the abutton.

If “ACI ERROR” is displayed in the AUTO PROGRAM menu:

“ACI ERROR” means that the ACI function is not working properly. Press the abutton to start the ACI function again.

If “ACI ERROR” still appears even after you have tried to start the ACI function several times, press the 3button to start the AUTO PROGRAM function. It does not cause any problems because all the TV channels are registered to the programme numbers (PR) by the AUTO PROGRAM function.

2When the settings are completed, the EDIT menu is displayed. Return to the instructions that you were reading before, and continue

When the “Initial Settings” have been made:

Return to step 5 of “Initial settings” on page 6

When the “AUTO PROGRAM” has been made:

Return to step 3 of “AUTO PROGRAM” on page 30

•If you have any questions about the items in the cable TV station’s broadcast selection menu or how to operate the menu, please contact your cable TV station.

•When the cable TV broadcast reception is poor, the ACI function will not work properly.

•If there is an error in the ACI data itself, the TV channel cannot be registered properly. If this happens, turn the ACI function off (ACI SKIP) and use the AUTO PROGRAM function, or the EDIT/MANUAL function to correct the programme number (PR) setting.

■Downloading data to a VCR

You can send the latest programme numbers (PR) data to a VCR with the T-V LINK function.

•You can only do this when a T-V LINK compatible VCR is connected to the EXT-2 terminal.

•This only works when the T-V LINK menu is being displayed.

T-V LINK

DOWNLOAD TV VCR

BACK

TV OK

EXIT

D0005-EK

1Turn on the VCR

2Press the abutton

The data transmission begins.

DOWNLOAD TV VCR

TRANSFER. . . . .

D0037-EK

The T-V LINK menu disappears once the data transmission ends.

When the T-V LINK menu changes over to another menu:

The TV has finished its menu. This new menu is operated from the VCR. See the VCR instruction manual for what to do next.

•If “FEATURE NOT AVAILABLE” appears at the T-V

LINK menu, check the following three items. Then press the abutton to retry data transmission.

−Has a T-V LINK compatible VCR been connected to the EXT-2 terminal?

−Has the VCR power been turned on?

−Does the SCART cable that connects the EXT-2 terminal to the T-V LINK compatible VCR have all its proper connections?

■Using the DECODER (EXT-2) function

If you have a decoder connected to a T-V LINK compatible VCR, which in turn is connected to the EXT-2 terminal, use the DECODER (EXT-2) function to unscramble the scrambled TV channels.

1Turn on the decoder power

2Display the scrambled TV channel on the

TV

Even if the decoder is working, a scrambled picture appears.

3Press the abutton to display the MENU

The MENU (main menu) appears.

35