Using your
2Press the 5 and 6 buttons to choose a programme number (PR). Then press the abutton
•For programme numbers (PR) where you have the CHILD LOCK function set, the n (CHILD LOCK) mark appears next to the programme number (PR) in the PR LIST.
•You cannot use the 6 buttons to choose a programme number (PR) which has the CHILD LOCK set.
•Even if you try to choose a programme number (PR) with the CHILD LOCK set, the n (CHILD LOCK) mark will appear, and you cannot watch the TV channel. To watch the TV channel, see “CHILD LOCK” on page 28.
•If the picture is tilted, correct it. See “PICTURE TILT” on page 20.
■Changing the volume
Press the 5 buttons to change the volume.
The volume indicator appears, and the volume changes, as you press the q buttons.
To listen to the sound using headphones:
See “HEADPHONE” on page 22.
■Watching images from
external equipment
Choose the EXT terminal that the external equipment has been connected to.
Use the obutton:
Press the obutton to choose an EXT terminal. Pressing the obutton changes the choice as follows:
Use the 6 buttons:
Press the 6 buttons to choose an EXT terminal
Use the PR LIST:
1Press the h(information) button to display the PR LIST
2Press the 5 and 6 buttons to choose an EXT terminal. Then press the abutton
•The EXT terminals are listed after programme number PR 99.
•You can choose two types of video input signal:
•When listening to Dolby Digital audio, see “Listening to Dolby Digital audio (Only AV32P10EK and AV32P10EI)” on page 38.
•If you do not have a clear picture or no colour appears, change the colour system manually. See “COLOUR SYSTEM” on page 20.
•If you choose an EXT terminal with no input signal, the EXT terminal number becomes fixed on the screen.
•This TV set can automatically change over the input according to a special signal from an external device. (The
To use the programme number PR 0 (AV):
When the TV and VCR are connected only by the aerial cable, choosing the programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to programme number PR 0 (AV) manually. For details, see “EDIT/MANUAL” on page 31.
Pressing the obutton changes the choice as follows:
TV mode | EXT modes |
TV mode
Programme
numbers
PR 1 to PR 99
EXT modes
Programme |
|
| PR 0 | ||
numbers |
|
|
|
|
|
PR 1 to PR 99 |
|
|
|
|
|
|
|
|
|
|
|
•The VCR sends its playback image along the aerial cable as an RF (radio frequency) signal.
•Also see your VCR instruction manual.
To return to a TV channel:
Press the bbutton, the 6 buttons or the number buttons.
9
