JVC AV32P10EK, AV32L5EK, AV32P10EI, AV32L5EI Link compatible VCR, Connecting headphones

Further preparation

Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-VHS VCR

Connect the equipment to an EXT terminal (but not the EXT-1 terminal).

You can choose between an S-VIDEO signal (Y/C signal) and a regular video signal (composite signal). For details of how to operate the equipment, see “S-IN (S-VIDEO input)” on page 26.

T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible VCR to the EXT-2 terminal. If not, the T-V LINK function will not work properly.

•When connecting a T-V LINK compatible VCR to the EXT-2 terminal, be sure to connect the decoder to the VCR. If not, the T-V LINK function may not work properly. After you have stored TV channels in the programme numbers (PR) list, set the DECODER (EXT-2) function for the programme number (PR) to ON to unscramble a scrambled TV channel. For details, see “Using the DECODER (EXT-2) function” on page 35.

Connecting headphones

Connect the headphones with a stereo mini-jack (3.5mm diameter) to the headphone jack at the TV front panel.

Video or sound signal output from the EXT-2 terminal

You can change over the output of the video/sound signal from the EXT-2 terminal. This is useful when you want to dub the video/sound from another device onto the VCR connected to the EXT-2 terminal. For details on how to do this, see “DUBBING” on page 27.

TV output from the EXT-1 terminal

The video/sound signal of a TV channel you are viewing is always output from the EXT-1 terminal.

•Changing over a programme number (PR) also changes over the TV output from the EXT-1 terminal.

•The video/sound signal from an EXT terminal cannot be output.

•Teletext programmes cannot be output.

■Listening to Dolby Digital audio (Only AV32P10EK and

AV32P10EI)

In order to listen to Dolby Digital audio which is recorded as a Dolby Digital programme source (such as a DVD-video disc), connect the device and set the DIGITAL-IN as described below.

Preparation:

•A device (such as DVD player) with a digital output terminal (coaxial or optical) for Dolby Digital is necessary.

•A coaxial cable or optical cable is necessary to make the connections. (Not supplied with the TV)

•In accordance with the instruction manual which is supplied with the device, correctly connect a coaxial cable or optical cable to the device’s DIGITAL OUT (digital output) terminal and set the device so that the Dolby Digital audio signal is output.

•Correctly connect the device to the EXT terminal in accordance with “Connecting external equipment” on page 37. However, since the EXT-4 terminal does not work with Dolby Digital audio, it cannot be used.

1Connect the device to the DIGITAL AUDIO IN terminal with a coaxial cable 1 or optical cable 2

	COAXIAL
or	DIGITAL
	AUDIO IN
	OPTICAL
	Back of the TV

2Connect the device and set the EXT terminal to DIGITAL-IN in accordance with “DIGITAL- IN (Only AV32P10EK and AV32P10EI)” on page 26

This completes the preparation.

•When an optical input and coaxial input are input simultaneously, the optical input takes precedence.

•When the headphones are used, the sound becomes normal stereo.

•This TV does not work with digital audio signals other than Dolby Digital audio. If no sound is emitted from the speakers, cancel the DIGITAL-IN setting and change to normal analog sound.

•The sound from the EXT terminal set to DIGITAL-IN is not output from the EXT-2 terminal.

38