JVC AV32P10EK, AV32L5EK, AV32P10EI, AV32L5EI Other surround functions, 3D-PHONIC setting

DIGITAL SURROUND (Only AV32P10EK and AV32P10EI)

■Other surround functions

DANCE CLUB:

This function creates a dance club atmosphere.

CONCERT HALL:

This function creates a concert hall atmosphere.

STADIUM:

This function creates a stadium atmosphere.

•The above function does not appear in the DIGITAL SURROUND menu when viewing a programme from the EXT terminal which has been set to DIGITAL-IN.

•The above function does not work properly for the Dolby Surround encoded programmes or mono sound programmes.

3D-PHONIC setting

1Press the 6buttons to choose

3D-PHONIC. Then press the 3button

The sub-menu of the 3D-PHONIC function appears.

3D-PHONIC

	TV SPEAKER	L/C/R	CENTRE OFF
	SUBWOOFER	OFF	ON
	LEVEL
	LEFT	VOLUME
	CENTRE
	RIGHT
	BACK
TV	OK

D0046-EK

2Press the 6buttons to choose an item. Then press the 5buttons to change the setting

TV SPEAKER:

Only set to CENTRE when the front speakers are connected to the TV. Otherwise set to L/C/R.

SUBWOOFER:

Set SUBWOOFER to ON when the subwoofer system is connected to the TV. Otherwise, set to OFF.

LEVEL:

You can control the effect level of the 3D-PHONIC function as you like.

VOLUME (LEFT/CENTRE/RIGHT):

You can adjust the sound level of each speaker individually. LEFT/RIGHT denotes left and right of the front speakers and CENTRE denotes the centre speaker.

3Press the OK button to complete the setting

The menu disappears.

•When a speaker system is not connected to the TV, set TV SPEAKER to L/C/R and SUBWOOFER to OFF. Otherwise the sound will not be emitted correctly.

•When you do not want to hear sound from the TV speakers, set TV SPEAKER to OFF.

•If you set TV SPEAKER to CENTRE or OFF, the sound from the subwoofer can be heard only when listening to the Dolby Digital sound with the Low Frequency effect (LFE). If you want to hear sound from the subwoofer every time, set TV SPEAKER to L/C/R.

DOLBY DIGITAL setting

Correctly set the items in the sub-menu of the DOLBY DIGITAL function, and use the test signal to control the volume level of the speakers so that you can listen to the sounds from them uniformly. Be sure to do this before using the DOLBY DIGITAL function.

1Press the 6 buttons to choose DOLBY DIGITAL. Then press the 3button

The sub-menu of the DOLBY DIGITAL function appears.

DOLBY DIGITAL

	TV SPEAKER	L/C/R	CENTRE OFF
	REAR SPEAKER	OFF	ON
	SUBWOOFER	OFF	ON
	TEST MODE	OFF	ON
	LEFT	VOLUME
	CENTRE
	RIGHT
	LS
	RS
	DELAY TIME
	BACK
TV	OK

D0047-EK

2Press the 6buttons to choose an item. Then press the 5buttons to change the setting

TV SPEAKER:

Only set to CENTRE when the front speakers are connected to the TV. Otherwise set to L/C/R.

REAR SPEAKER:

Set to ON when the rear speaker is connected to the TV. Otherwise set to OFF. However, you cannot enjoy surround sound when it is set to OFF.

SUBWOOFER:

Set SUBWOOFER to ON when the subwoofer system is connected to the TV. Otherwise, set to OFF.

TEST MODE/VOLUME (LEFT/CENTRE/RIGHT/ LS/RS):

Set the volume balance of the speakers so that the correct surround effect can be achieved.

When the other settings have been completed, adjust in accordance with “Adjusting the volume balance with the TEST MODE” on page 25.

DELAY TIME:

A delay can be applied to SURROUND (surround sound) and CENTRE (centre sound) depending on the arrangement of the speakers.

Select DELAY TIME and press the 3 button to display the DELAY TIME menu. The DELAY TIME is changed in 1ms steps every time the 5buttons are pressed.

DELAY TIME

0 15

SURROUND

05 CENTRE

BACK

TV OK

D0048-EK

24