Fusion Intelpage IP | Manual |
3.2.5Transmitter Settings
•Frequency Band – After the Intelpage IP unit has read the data from the internal transmitter, it will display the band of the radio inside. This will either be 148- 174MHz or
•Frequency – Here you can type the frequency required for the site. For example if your pagers are operating on 450.325MHz, then you would type in 450325000.
•Power Level – Use the drop down menu to toggle between Low, Medium or High power levels. These values typically correspond to power output levels of 500mW, 2W and 5W respectively.
•Channel Spacing - This field refers to the space between adjacent channels. In the majority of applications, 25kHz should be selected here (for ±4.5kHz FSK). If you are using pagers capable of narrow band (±2.5kHz FSK) you can select 12.5kHz in this field.
Page 34 | © CommtechWireless |
