Manual | Fusion Intelpage IP |
Pocsag
•Speed - The speed of transmission. This value must match that of the pagers receiving the messages. (default 512)
•Default Tone - The tone type that the pager will emit when the message is received. (default A)
•Type - The type of message to send. Tone only, Numeric or Alpha. This should match the type of the pager. (default Numeric)
NOTE: If the SCOPE protocol is chosen, speed, tone and type are specified along with the message and will override the POCSAG settings values.
•PTT / Data / Busy Invert - If checked, these invert the respective signal. This may need to be done if third party transmitters are used. (Maxon transmitter must have PTT invert ticked)
•Ignore Busy - If checked, send the message regardless of whether or not the channel is busy. (default OFF)
© CommtechWireless | Page 37 |
