Fusion Intelpage IP | Manual |
1.3Rear Panel
1.3.1Connectors
•Ethernet
The RJ45 Ethernet port may be used for connection to a PC or external system for configuration or operational purposes.
•RS232
The RS232 port may be used for connection to a PC or external system for configuration or operational purposes. Details of the required RS232 pins are as follows:
The pinouts are described below.
Abbreviation | Pin Number |
GND | 4 |
RX | 5 |
TX | 6 |
CTS | 7 |
RTS | 8 |
Antenna Port
The antenna port is an opening to allow connection of the antenna to the internal transmitter. The connector is a standard BNC 50ohm.
1.3.2DC Input
This connector is used to supply power to the unit. The CMM requires 12VDC @ 2amps regulated. You will have been supplied with a suitable power supply with mains lead which will plug straight into this socket.
Page 10 | © CommtechWireless |