Boot Up NumLock Status
Select power on state for NumLock.
The choice: On/Off.
Gate A20 Option
Select if chipset or keyboard controller should control GateA20.
Normal | A pin in the keyboard controller controls |
| GateA20 |
Fast | Lets chipset control GateA20 |
Typematic Rate Setting
Key strokes repeat at a rate determined by the keyboard controller. When enabled, the typematic rate and typematic delay can be selected.
The choice: Enabled/Disabled.
Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a key stroke when the key has been held down.
The choice: 6, 8, 10, 12, 15, 20, 24, 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat the keystroke.
The choice: 250, 500, 750, 1000.
Security Option
Select whether the password is required every time the system boots or only when the user enters setup.
System | The system will not boot and access to Setup will |
| be denied if the correct password is not entered at |
| the prompt. |
Setup | The system will boot, but access to Setup will be |
| denied if the correct password is not entered at the |
| prompt. |
Note: To disable security, select PASSWORD SETTING at Main Menu and then the user will be asked to enter password. Do not type anything and just press <Enter>, it will disable security. Once the security is disabled, the system will boot and Setup page can be accessed freely.
OS Select For DRAM > 64MB
Select the operating system running with greater than 64MB of RAM on the system.
The choice:
27
