IBM SAGP-845EV user manual Bi-directional parallel port

Bi-directional parallel port	Configurable to LPT1, LPT2, LPT3 or disabled
	Supports EPP/ECP/SPP
Hardware monitor	Monitors power supply voltage and fan speed status
IrDA port	Supports Serial Infrared (SIR) and Amplitude Shift
	Keyed IR (ASKIR) interface
USB port	Supports 4 USB2.0 ports for future expansion
	− Programmable
Watchdog timer	− Reset generated when CPU does not periodically
	trigger the timer
	− The BIOS routine INT15 can be used to control the
	watchdog and generate a system reset
VGA controller	− Built-in AGP2.0 4X 3D graphics engine
	− Share system DDR SDRAM 8M
	− Screen Resolution: up to 2048x1536x16 bit
	− ICH4 Fast Ethernet controller, IEEE 802.3u Auto-
	Negotiation support for 10BASET/100BASE-TX
Ethernet	standard
	− One RJ45 connector is located on the mounting
	bracket
	− A 6-pin mini DIN connector is located on the
	mounting bracket for easy connection to a
Keyboard and PS/2 mouse	keyboard or PS/2 mouse.
connector	− For alternative applications, a keyboard and a PS/2
	mouse pin header connectors are also available on
	board.
	− CMI8738LX supports 6CH DAC for AC3 5.1 channel
Audio	purpose
	− HRTF-based positional audio, support Directsound
	3D and A3D interface
Compact flash	It can be used with a passive adapter (True IDE
	Mode) in a Type I/II Socket.
	− (PENTIUM 4: 2GHz, 1GB PC2100 DDR SDRAM)
	+5V @ 4.46A, +12V @ 6.55A.
Power consumption	− (PENTIUM 4-M: 2.5GHz, 512MB PC2100 DDR
	SDRAM) +5V @ 4A, +12V @ 3A.
	Recommended: 350-watt or higher output power
	supply
Operating temperature	0° ~ 60° C
	(*CPU needs Cooler & silicone heat sink compound*)

WARNING!

1.Never run the processor without a heat sink (Cooler) properly and firmly attached.

2.Please use ATX-12V power connector (PW2) to provide power to the CPU.

5