09Additional information
Resetting the system
Use the front panel controls to reset all system settings to the factory default.
• With the system on, press | STANDBY/ |
ON while holding down | USB. |
The next time you switch on, all the system | |
settings should be reset. |
|
Setting the Key Lock
You can disable the front panel buttons by switching the Key Lock feature on.
1 With the system in standby, press SETUP
and use to choose KEYLOCK then press
ENTER.
This is shown in the front panel display.
2 Use to select LOCK ON or LOCK OFF then press ENTER.
Using the language code list
Some of the language options (see Language settings on page 27) allow you to set your preferred language from any of the 136 languages in the Language code list below.
1 | Select ‘Other Language’. | |
2 | Use | to select either a code letter or |
a code number. | ||
3 | Use | to select a code letter or a code |
number. |
|
See the Language code list (next page) for a complete list of languages and codes.
44
En