Other connections
08
Connecting using HDMI
If you have a HDMI or DVI (with HDCP) equipped monitor or display, you can connect it to this player using a commercially available
HDMI cable for high quality digital video.1
See About HDMI below for more about the HDMI connection.
•Use an HDMI cable to connect the HDMI OUT interconnect on this player to an HDMI interconnect on a
|
| HDMI |
|
|
|
|
| connector |
|
|
|
| |
|
|
|
| |||
ANTENNA |
| CR/ |
|
|
| |
|
| COMPONENT | PR | FRONT R | L |
|
|
| VIDEO | LINE | CENTER | ||
|
| VIDEO | CB/ |
|
|
|
| FM | PB | L |
|
| |
AM LOOP | UNBAL 75 Ω |
|
|
|
| |
|
| Y | R |
|
|
|
| SURROUND R | L | SUB |
|
| WOOFER | ||
HDMI OUT | VIDEO OUT | AUDIO IN | SPEAKERS |
|
•The arrow on the cable connector body should be face up for correct alignment with the connector on the player.
You can also adjust the HDMI settings for resolution and color. For more on these settings see Video Output settings on page 26.
Switching the HDMI audio setting
To listen to audio from the HDMI interconnect, make sure you’ve specified the HDMI audio output setting.
1 | Switch the system into standby. | ||
2 | Press SETUP and use | to choose | |
HDMI OUT then press ENTER. |
| ||
3 | Use | to choose the setting you want | |
then press ENTER. |
|
•AUDIO ON – Audio signals are output through the HDMI interconnect
•AUDIO OFF – Switches off HDMI audio
Resetting the HDMI connection
If you get an error message (the display shows HDMI ERR) or if the screen goes blank (for example, after changing the resolution), check the troubleshooting guide on page 42. If this doesn’t solve the problem, follow the steps below to reset the HDMI connection.
1 Switch the system into standby.
2 Press SETUP and use | to choose |
HDMI INI then press ENTER. |
|
The system will restart and the HDMI settings are automatically reset to the factory defaults. See Video Output settings on page 26 for more on these settings.
English Deutsch Français Italiano Nederlands Español
Note
1 • An HDMI connection can only be made with
•This unit has been designed to be compliant with HDMI (High Definition Multimedia Interface) Version 1.1. Depending on the component you have connected, using a DVI connection may result in unreliable signal transfers.
•When you change the component connected to the HDMI output, you will also need to change the HDMI settings to match the new component (see Video Output settings on page 26 to do this).
33
En