Kenwood FP930, FP920 troubleshooting guide, Problem, Cause, Solution, lid are fitted incorrectly

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.

At the end of its working life, the product must not be disposed of as urban waste.

It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.

Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

troubleshooting guide

Problem	Cause	Solution
The processor will not operate	No power/indicator light not lit.	Check processor is plugged in
	Bowl not locked on correctly.	Check bowl is located correctly and the handle is
		situated towards the right hand side.
	Lid not locked correctly.	Check that the lid interlock is located correctly into
		the handle area.
		The processor will not work if the bowl and
		lid are fitted incorrectly.
		If none of the above check the fuse/circuit breaker in
		your home.
Liquidiser/mill will not operate	Wrong base used.	The mill base is not interchangeable with the
		FP920/FP930 liquidiser jug. The processor
		will not operate if the wrong base is fitted.
		Check graphic is correct on base used.
Processor stops during	Processor overloaded/maximum capacities	Check maximum capacities stated under “to use your
processing	exceeded.	food processor”.
	Lid unlocked.	Check lid is locked correctly.
Poor performance of	Refer to hints in relevant “using the attachment” section. Check attachments are assembled correctly.
tools/attachments.

9