to use your liquidiser (FP910)
1 Fit the sealing ring | into the blade unit |
-ensuring the seal is located correctly.
Leaking will occur if the seal is damaged or not fitted correctly.
2Screw the jug onto the blade unit.
3Put your ingredients into the jug.
4Put the filler cap in the lid, then turn.
5Turn the lid in a clockwise direction to lock onto the jug.
6Place the liquidiser onto the power unit
and turn to lock .
7 Select a speed or use the pulse control.
● Allow all liquids to cool to room temperature before |
placing them in the liquidiser. |
hints |
● When making mayonnaise, put all the ingredients, except the oil |
into the liquidiser. Then with the machine running, pour the oil into |
the filler cap and let it run through. |
● Thick mixtures, eg pates and dips, may need scraping down. If |
it’s difficult to process, add more liquid. |
● When crushing ice use the pulse in short bursts. |
● To ensure the long life of your liquidiser, never run it for longer |
than 60 seconds. Switch off as soon as you’ve got the right |
consistency. |
● Don’t process spices - they may damage the plastic. |
● The machine won’t work if the liquidiser is fitted incorrectly. |
● Don’t put dry ingredients into the liquidiser before switching on. If |
necessary, cut them into pieces; remove the filler cap; then with |
the machine running, drop them through one by one. |
● Don’t use the liquidiser as a storage container. Keep it empty |
before and after use. |
● Never blend more than 11⁄2 litres (2pts 12floz) - less for frothy |
min 0
P
max
multi pro
to use your liquidiser (FP920/FP930)
1 Fit the sealing ring into the blade unit
-ensuring the seal is located correctly.
Leaking will occur if the seal is damaged or not fitted correctly.
2Screw the jug onto the blade unit.
3Put your ingredients into the jug.
4Push the lid seal onto the underside of the lid.
5Fit and lock the filler cap in the lid, by
turning one position 
.
6Fit the lid to the goblet and turn
the filler cap to 
to lock.
The filler cap can be located in 3 different
positions (see A)
- filler cap removable for adding ingredients to the jug.
- lid unlocked/filler cap locked to the lid for fitting
and removing the lid.
- lid locked.
7Place the liquidiser onto the power unit
and turn to lock .
8Select a speed or use the pulse control.
A
1.5 1.3 1.1 0.9 0.7
0.5
0.3
min 0
P
max
multi pro
liquids like milkshakes. |
Note: The mill base is not interchangeable with the |
FP920/FP930 glass liquidiser jug. The processor will |
not operate if the wrong base is fitted. Refer to |
graphics on blade unit bases. |
4
