3Com OfficeConnect Remote 812 Publicaddress ipaddress, Publicpoolstart ipaddress, Tunnelname

Description

The name of the vc for which you are deleting the dynamic NAT mapping.

The public IP pool start address of the dynamic NAT mapping you wish to delete.

B-12APPENDIX B: CLI COMMAND DESCRIPTION

delete nat [dynamic static ] vc <vc name> public_pool_start <address>

public_address <ip_address>

Deletes the static NAT mapping to this public IP address for the associated VC.

￿Parameter	Description
<vc_name>	The name of the vc for which you are deleting the static NAT mapping.
public_address	The public IP address of the static NAT mapping you wish to delete.

public_pool_start <ip_address>

￿Deletes the dynamic NAT mapping to this pool of public IP address for the associated VC.

Parameter

<vc_name>

public_address

delete network service Deletes the specified network service from the list of available services. You must <service_name> use disable network service before deleting the service. You can see which services

are available and active using list available services and list services.

delete snmp Deletes an SNMP community that was previously added with the add snmp community <name> community command. You can use list snmp communities to see the current

entries.

delete snmp Deletes an SNMP trap community name from the list of names and IP addresses trap_community that are allowed to receive SNMP trap commands. You can use list snmp

<name> communities to see the current entries.

delete syslog Deletes the specified IP host name or IP address from the list of addresses which <ip_name_or_address> are authorized to receive syslog information. Use list syslog to see the currently

allowed addresses.

delete tftp client Deletes the specified IP host name or IP address from the list of addresses which <ip_name_or_address> are authorized to TFTP. Use list tftp clients to see the currently allowed addresses.

delete tunnel Deletes the specified tunnel.

<tunnel_name>

delete user <name> Deletes a user you previously added to the local user table. Use list users to see the currently defined user, and show user to see the attributes you assigned to that user using the add user or set user command.

delete vc <name> Deletes a virtual channel profile. Use list vc to see the currently defined VCs, and show vc to see the attributes of a specific VC. A VC must be disabled before it can be deleted.