3Com OfficeConnect Remote 812 manual set dhcp server startaddress ip address endaddress ip address

set dhcp server domain <domain name>

set dhcp server hostname <host name>

set dhcp mode server

Use the following commands to configure the DHCP Mode, base Hostname and the network’s Domain Name:

6-28CHAPTER 6: MANUAL SETUP

Configuring the DHCP The OCR 812’s DHCP Server has the following fields that will need to be Server configured:

Hostname

Domain Name

IP Address Pool, Start and End address

IP Subnet address mask

Lease period

WINS Server addresses

￿DNS Server addresses

The Hostname is the base name assigned to the workstation. A numeric suffix is appended to the base name and incremented after each assignment. For example, if the Hostname unit is configured, the first workstation will be assigned the Hostname unit01, the second workstation will be assigned unit02 and so forth.

￿The DHCP address pool is configured by specifying the starting and ending addresses of the pool. The range of the pool must be 40 addresses or less and must be entered on the same command line.

The following set of commands configure the address pool and the network subnet IP address mask:

set dhcp server start_address <ip address> end_address <ip address>

￿	set dhcp server mask <ip address>
	The final set of DHCP Server commands configure the Lease period and IP
	addresses of the Default gateway, WINS Servers, and DNS Servers. There can be
	up to two WINS and DNS Servers specified. If this functionality is to be
	disabled, an IP address of 0.0.0.0 is entered. If the OCR 812 is functioning as
	the DNS Proxy, the OCR 812’s LAN IP address should be configured as the first
	(primary) DNS address.
￿	set dhcp server lease <seconds>
	set dhcp server router <ip address>
	set dhcp server wins1 <ip address> wins2 <ip address>
	set dhcp server dns1 <ip address> dns2 <ip address>

Monitoring the DHCP There are monitoring commands which display the DHCP protocol counters and Server current lease information.

The DHCP protocol counters indicate the requests received, responses transmitted, and error indicators. The lease information indicates which IP addresses have been