Empire Comfort Systems DVD42FP5 Follow correct option according to venting method, Parts List

DVVK-4RE VENT KIT INSTALLATION INSTRUCTIONS (continued)

Follow correct option according to venting method.

Connecting Directly to Fireplace

If the air inlet and flue outlet tubes are to be connected directly to the unit (no rigid venting system is being used), then the gasket provided must be used to seal the 4” (102mm) flue outlet tube. Peel the paper off the self-adhesive gasket and then wrap it around the end of the tube (if tube was cut, it is recommended to use cut end) as shown in Figure 4. Pull the gasket tight at all times while wrapping it around tube. The gasket ends should align, to form a complete seal. The overlapped section should NOT come in con- tact with the seam in the tube. Apply high temperature sealant to the opposite end of the tube (on the inside of the tube). The end with the gasket will attach to the back of the unit. Continue with Step 13.

		PARTS LIST
INDEX	PART		DESCRIPTION
NUMBER	NUMBER
1	DV769		Vent Cap Assembly
2	19193		Outside Mounting Plate
3	19194		Air Inlet Tube
4	DV524		Flue Outlet Tube
5	19196		Firestop/Thimble Assembly
6	20527		Gasket

Connecting to Rigid Vent System

If the air inlet and flue outlet tubes are to be connected to a rigid venting system (and not directly to the back of the unit), then do not use the gasket provided. High temperature sealant should be applied to the outside of the 4” diameter (102mm) flue outlet tube (if tube was cut, it is recommended to use cut end) and to the in- side of the tube on the end that connects to the vent cap. Continue with step 13.

23552-1-0607 Page 29