3Com OfficeConnect Remote 812 manual Scr number Type PVC SVC Vci number Vpi number

B-38APPENDIX B: CLI COMMAND DESCRIPTION

	management_ip_		Secondary IP address on the VC for Management purposes only. If the
	address		Management IP address is configured, the ‘local_IP_address’ must be
			configured as numbered.
			Address is configured with the following format:
			xx.xx.xx.xx/nn -- where nn is the number of bits in the netmask or
			netmask class (i.e., A, B, or C).
	MTU		Maximum Transfer Unit - largest data packet size allowed.
	NAT_option		Enable or disable PAT, NAT, or Super NAT.
	PAT_default_		Default workstation address that incoming IP traffic will get forwarded to
	address		if the demuxing of the network address translation is unresolved.
	Network_service		Type of network service. Default is PPP.
	output_filter		Name of filter file in FLASH memory to be applied to output data stream.
	Password		The password is an alphanumeric string of maximum size 15 characters.
	remote_IP_address		For a client IP connection, address assigned to the client.
	Rip		Selects either RIPV1 or RIPV2 for IP RIP.
	rip_authentication		Text string used for RIPv2 authentication.
	rip_policies		Allows VC to enable or disable RIP policies. See text on the preceding
	_update		page for description of keywords. A keyword with a NO_ in front is used
			to disable the policy. Default is indicated by (D).
			SEND_DEFAULT/NO_SEND_DEFAULT(D)
			SEND_ROUTES(D)/NO_SEND_ROUTES
			SEND_SUBNETS/NO_SEND_SUBNETS(D)
			ACCEPT_DEFAULT/NO_ACCEPT_
			DEFAULT(D)
			SPLIT_HORIZON(D)/NO_SPLIT_HORIZON
			POISON_REVERSE(D)/NO_POISON_
			REVERSE
			FLASH_UPDATE(D)/NO_FLASH_UPDATE
			SEND_COMPAT(D)/NO_SEND_COMPAT
			RIPV1_RECEIVE(D)/NO_RIPV1_RECEIVE
			RIPV2_RECEIVE(D)/NO_RIPV2_RECEIVE
			SILENT (default is disabled)
	send_name		An identification name sent to the remote network.
	send_password		Password sent to the remote network. Limit: 15 characters.
	Type		Describes type of connection. Options:
			ONDEMAND - makes connection when the system needs a session with
			the remote network.
			CONTINUOUS - keeps connection up all the time
			MANUAL - manually starts connection using the CLI
set vc <vc_name> atm		set [number]
		category_of_service [Unspecified (UBR) Variable (VBR)]
		pcr [number]
		scr [number]
		type [PVC SVC]
	￿	vci [number]
		vpi [number]