3Com OfficeConnect Remote 812 manual show dns counters show dns settings show filter filtername

Timeout Period in Seconds - number of seconds to wait before deciding a request to a Name Server has timed out

Displays settings for all DNS servers. You can modify using set DNS.

Administration Status - This controls whether the DNS server has ￿administration status. Options are Enabled or Disabled.

Number Retries per Server - number of times the resolve name request will be sent to each Name Server, if the server fails to respond to a request before the timeout period

B-44APPENDIX B: CLI COMMAND DESCRIPTION

show dns counters

show dns settings

show filter <filter_name>

DNS #1 - IP address of the primary DNS server that the DHCP server will utilize when resolving names.

DNS #2 - IP address of the secondary DNS server that the DHCP server will utilize when resolving names.

WINS #1 - IP address of the primary WINS server that the DHCP server will

￿utilize

WINS #2 - IP address of the secondary WINS server that the DHCP server will utilize.

Displays various counters for DNS.

Total Queries Received - sum of DNS queries received

Total Response Sent - sum of DNS responses sent

Responses from Local Processing - number of DNS responses from local.

Responses from Remote Processing - number of DNS responses from remote.

Success Responses - successful responses to DNS requests

Error Responses - sum of failures to DNS requests, specifics shown below

SPECIFIC ERROR COUNTERS

Format Errors - server said invalid request format

Problems with Name Server - internal server error

NonExistent Name - number of times requested name could not be resolved

Server refused the request - server was able to accept a request

Server does not implement request - server was able to accept a request Corrupted Responses - response did not decrypt

Timeouts - number of time outs waiting for the server to respond

￿Response could not be sent - the requester had terminated

￿protocols [BR-ETH,BR-ETH-CALL,IP IP-CALL, IP-RIP]

￿

Displays the filter rules, based on the protocol options specified. The filter name MUST be a filter file, as listed using list filters.

BR-ETH- Ethernet bridge data filter rules

￿