Panasonic KX-TVP200 Print Reports at Specified Time Pset, Error Log Display Elog

7.2 UTILITY COMMANDS

3.Type the current date. For the year, type the last 2 digits.

Note

Enter the exact time and date. This command cannot be used when either the System or the Message Manager is accessing the time setting feature.

7.2.5 Print Reports at Specified Time (PSET)

Use the PSET command to issue system usage reports (Disk Usage Report, Port Usage Report, Call Account Report) at a specified time each day. A printer or data terminal must be connected to the VPS at the RS-232C port for the reports to be printed or displayed.

1.Type PSET, then Press RETURN.

$ PSET

Report Print Out Service [ Disable ]

1 : Enable 2: Disable :=

2.Type [1] to enable this function or Type [2] to disable it.

Enter The Print Out Time (HH:MM, AM/PM) :=

3.Type the time to print the reports.

Note

The reports will be displayed only if the system is in the mode where you see the following prompt:

>

7.2.6 Error Log Display (ELOG)

Use the ELOG command to diagnose VPS problems. Selection of this command will display an error log.

COM. Communication error between CPU and DSP

DATA Process error of voice data

MEM. Memory error

PRG. Program error in CPU card

R/W Read/Write error of Hard Disk

Type ELOG, then Press RETURN.

Installation Manual 151