Panasonic KX-TVP200 installation manual To be set include Beeper Callback No. Entry Mode, MWL

B3 SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE) PARAMETERS

Table B-8

Parameter	Value Range		Description/Function
		(Default)
Message	1.	Yes	If set to "Yes", the VPS adds the message sender’s name
Scanning with	2.	No	and the recording date and time to the message during the
Information		(No)	message scan.
Prompt Mode	1.	System	Specifies the language used for voice prompts.
	2.	User 1
	3.	User 2	Note: If User 1 is specified as Prompt Mode but not
		(User 1)	recorded by the Message Manager, the VPS will
			automatically play the factory-recorded System prompts in
			English. By default, User 1 prompts are not recorded.
Remote Call	1.	Yes	If set to "Yes", Remote Call Forwarding can be set to an
Forward to CO	2.	No	outside (CO) line; the Message Manager can program his
		(No)	extension from a remote location to forward various types of
			calls to either "Telephone No.1" or "Telephone No.2"
			(preprogrammed in the Mailbox Setting), or to any other
			telephone number.
			Note: The Remote Call FWD to CO feature is available if
			DPT Voice Mail Integration is activated with a Panasonic
			KX-TD series telephone system.
			Important Note: With respect to PBX programming, it is
			possible that "Call Forward to CO" is disabled. To enable
			VPS Remote Call Forwarding, the KX-TD1232, for example,
			must be programmed properly. For the COS of the
			extensions whose calls are to be forwarded to an outside
			(CO) line, enable the following: [504] Call Forward to
			Outside Line.
Delete	1.	Yes	If set to "Yes", the VPS requests confirmation from the
Message	2.	No	mailbox owner before erasing a message left in the mailbox.
Confirmation		(No)	If set to "No", the message is erased immediately.
Authorization	1.	Yes	If set to "Yes", the Message Manager is able to utilise the
for Message	2.	No	Message Waiting Notification feature. The sub-parameters
Notification		(Yes)	to be set include Beeper Callback No. Entry Mode, MWL
			Notification for Unreceived Message, and Device
			Notification for Unreceived Message. If set to "No", sub-
			parameters cannot be assigned.

Installation Manual 223