Panasonic KX-TVP200 installation manual Operator’s Parameters, Enable

5.4 AUTOMATED ATTENDANT PARAMETERS

5.4.3 Operator’s Parameters

If you enable operator service, you must set the following parameters: Operator’s Extension and Mailbox Number, Coverage Modes, and Message Repeat Cycle.

Operator 1:

The default is set at "0" which coincides with the operator of the PBX. When a caller tries to leave a message for Operator 1, the message will automatically go to the General Delivery Mailbox (GDM) by default.

Operators 2 and 3:

For KX-TD500, KX-TD816, KX-TD1232 and KX-TD612, Operators 2 and 3 can be assigned to a floating number that is assigned to a ring group.

Return to Program-Service Setting-Auto. Attn. Setting Menu:

Enter The Number : = 2

Program - Service Setting - Auto. Attn. Setting - Operator's Parameters Menu

1.Day Mode

2.Night Mode

3.Lunch Mode

4.Break Mode

SELECT ITEM AND PRESS KEY

1.Operator 1

2.Operator 2

3.Operator 3

SELECT ITEM AND PRESS KEY

Enter the data using the table below as a guide. The table below is for Operator 1 as an example. Please refer to it for Operators 2 and 3.

Table 5-6

Description		Value Range	Description/Function
		(Default)
Operator	1.	Disable	Enables or disables the Operator Service feature.
Service	2.	Enable	[Note]
		(Enable)	• All non-touchtone input calls in Automated
			Attendant Service will be transferred to the
			General Delivery Mailbox when the Operator
			Service is disabled.

Installation Manual 127