Panasonic KX-TVP200 Mailbox numbers displayed on this screen, Length of mailbox numbers, Example

5.1 STARTING UP

a)To create or discard mailboxes

In the "MAKE (Make/Delete)" field: Type [M] (Make) to create the mailbox; Type [D] (Delete) to discard the mailbox. If there are more than 1022 mailboxes, the first 1022 of them are displayed with "Make" and the rest are displayed with "Delete" (screen output: [Assigned 1022, Vacant 0]).

To change the status of a mailbox from "Delete" to "Make", first change the status of a mailbox from "Make" to "Delete" (screen output: [Assigned 1021, Vacant 1]). Then change the status from "Delete" to "Make".

b)Owner’s last name

Up to 16 alphabet characters can be assigned as an Owner’s Last Name.

Note

•Mailbox numbers displayed on this screen

Panasonic KX-TD Series System

The same numbers as the extensions of the KX-TD series system that were automatically transmitted to the VPS—Auto Configuration.

Non-KX-TD Series System

The same numbers as those of the extensions entered in step 3.

•The length of mailbox numbers

The Message Manager mailbox (General Delivery Mailbox) might be 2- to 5-digits long (98, 998, 9998, or 99998).

The System Manager mailbox might be 2- to 5-digits long (99, 999, 9999, or 99999).

If both 3 and 4-digit extension numbers exist at the same time, the VPS will unify all mailbox numbers to 4-digit length by entering [0] at the end of all 3-digit numbers.

Example:

Extension	Mailbox
Numbers	Numbers
201	201(0) *
202	202(0) *
203	203(0)*
2000	2000
2001	2001
2002	2002

*The VPS puts [0] at the end of 3-digit numbers.

Note

After creating mailboxes for subscribers by Quick Setup, the COS parameter "Authorization for Message Notification" (see Table B-7in B3 SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE) PARAMETERS) for COS number 1 will be set to "Yes". It will stay "No" for COS number 2 through number 62.

To program mailbox parameters other than the extension numbers and Owner’s Last Name (or First Name), see 5.5 SETTING MAILBOXES. The caller can use "Dial by

110 Installation Manual