Panasonic KX-TVP200 KX-TD500 Programming for Digital Integration, Set Status to INS

4.2 KX-TD500 PROGRAMMING FOR DIGITAL INTEGRATION

4.2KX-TD500 PROGRAMMING FOR DIGITAL INTEGRATION

A maximum of 2 VPS cards for the VPS can be installed at the KX-TD500. Follow the procedure below to program the VPS card(s) for DPT Integration.

Note

The KX-TD500 is not sold in the United Kingdom. It is only available in some countries.

1.Assignment of the VPS card to be connected to the VPS

Note:

If the VPS card to which the VPS will be assigned is already installed in the KX- TD500, skip the steps a through d. If a new VPS card is installed in the KX-TD500, follow the steps below.

a)Go to the "1-1 Slot Assignment" screen.

b)Assign the slot "Card Type" to be installed to "DLC" or "DHLC" card.

c)Click "Apply" to save the card type assignment.

d)Set "Status" to "INS".

Screen output:

e)Check the information of "Card Properties" and confirm the LPR version of the card.

Note:

The LPR Version must be "2" or higher for the first VPS card (101: DHLC) to which the control channel will be assigned, or "1" or higher for the second VPS card (104: DHLC).

78

Installation Manual