Panasonic KX-TVP200 installation manual Inband Signalling, Digit Translation Table Parameters, Dnd

3.2 PBX PARAMETERS AND PORT SETTINGS

is busy. PBXs differ in how they handle this function. Test from an SLT to determine the sequence.

•Release Sequence for Call Waiting:

This sequence is carried out by the VPS to release call waiting. PBXs differ in how they handle this function. Test from an SLT to determine the sequence.

Inband Signalling

These parameters are used when the Integration Mode is set to Inband. If the PBX type is set to a KX-T series system, these parameters will be automatically set. If another type PBX is used, check that system’s installation manual for settings.

Table 3-4

Code	Call State	Sent to the Voice Mail Port When...
(default)
1	Ringback Tone	The extension dialled is ringing.
2	Busy Tone	The extension dialled is busy.
	Reorder Tone	An invalid extension number is dialled or the call is
3		inadvertently connected to another Voice Mail port (also
		heard when no touchtone receiver is available to the Voice
		Mail extension).
4	DND	The extension dialled has set DND (Do Not Disturb).
5	Answer	The extension dialled is answered.
	Forwarded to	The extension dialled is forwarded to Voice Mail and
6	Voice Mail	another Voice Mail port is able to answer. (This lets the first
	(Ringing)	Voice Mail port, usually an Auto Attendant, send the call to
		the other Voice Mail port.)
	Forwarded to	The extension dialled is forwarded to Voice Mail and no
7	Voice Mail (Busy)	other Voice Mail ports are available to accept the call. (This
		signals the Voice Mail port [usually Auto-Attendant] to let the
		caller to leave a message.)
8	Forwarded to Extn.	The extension dialled is forwarded to another non-Voice
		Mail extension.
9	Confirmation Tone	The Message Waiting Lamp On or Message Waiting Lamp
		Off code is dialled successfully.
	Disconnect	The caller disconnects. The telephone company must send
#9		a CPC signal to the PBX for this feature to work on outside
		calls.

Digit Translation Table Parameters

These parameters allow PBXs that have a fixed Follow-on ID sequence to be used with the

VPS. For example, a Follow-on ID sequence of [201] can be changed to [#6201] by using these parameters.

•Inter-DigitTime-Out:This parameter defines the duration of incoming signals (Follow- on ID) from the PBX to the VPS. The Digit Translation Table is applied to the digits received within this time.

Installation Manual

55