Panasonic KX-TVP200 installation manual Software Verification, From the SYS-PGM no ? screen, Enter

4.3 CONNECTING THE VPS WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD612

4.3CONNECTING THE VPS WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD612

Notes

•Do not use System Programmes [106], [131], [602] or [813] for DPT Integration.

•The next 2 sections (4.3.1 KX-TD1232 Software Verification and Programming for DPT Integration via the Manager’s Extension and 4.3.2 KX-TD1232 Software Verification and Programming for DPT Integration via the Operating and Maintenance Tool) are for the KX-TD1232 as examples. Please refer to them for the KX-TD816 and the KX- TD612.

4.3.1KX-TD1232 Software Verification and Programming for DPT Integration via the Manager’s Extension

It is important that the KX-TD1232 has the proper software level to allow DPT Integration with the VPS. Follow the procedures below to confirm the software level, then complete the required programming before starting up the VPS.

Note

Two methods of programming are available on the KX-TD1232. The instructions below show how to program without the operating and maintenance tool. For instructions on programming with the operating and maintenance tool, please see

4.3.2KX-TD1232 Software Verification and Programming for DPT Integration via the Operating and Maintenance Tool.

All of the following procedures must be done after entering system programming. Refer to the KX-TD1232 Programming Guide or Installation Manual for instructions on how to enter the system programming mode.

Software Verification

1.Verify Software–If you are configuring a 2-cabinet system, remember to check both cabinets. The software must be the same in each. Check the software version of the KX- TD1232 using System Programme [116].

Example: P111GYMMDDA

The underlined digits represent the software production date code (year, month, day).

If the software version of the PBX is old, you may not be able to utilise some of the features available only with DPT Integration. For more information, consult your dealer.

From the SYS-PGM NO ? screen:

a)Enter [116].

b)Press the NEXT button (SP-PHONE).

86

Installation Manual