2.3 MOUNTING THE VPS ON A WALL

2.3MOUNTING THE VPS ON A WALL

The wall where the VPS is to be mounted must be able to support the weight of the VPS. If screws other than the ones supplied are used, use the same-sized diameter screws as the enclosed ones.

Mounting on a Wooden Wall:

1.Place the template (included) on the wall to mark the 3 screw positions.

Template

2.Install the 3 screws (included accessories) into the wall.

Wooden

Wall

Drive the screw to this position.

3.Hook the unit on the screw heads.

Mounting on a Concrete or Mortar Wall:

1.Place the template on the wall to mark the 3 screw positions.

34

Installation Manual

Page 34
Image 34
Panasonic KX-TVP200 Mounting the VPS on a Wall, Mounting on a Wooden Wall, Mounting on a Concrete or Mortar Wall