Panasonic KX-TVP200 Port Service Setting Screen output, Password Setting Screen output

5.1 STARTING UP

Name" feature using the Owner’s Last Name when in Automated Attendant Service or Voice Mail Service.

5.Port Service Setting Screen output:

Quick Setup- Port Service Setting

All ports are currently set up to handle callers with standard automated atten- dant operation, day and night mode, using the Custom Service feature (Custom 1). You can change the operation to standard voice mail (Custom 2) or leave it as automated attendant. If necessary, Custom 1 and Custom 2 can be modified under the menu 'Program -> Service Setting -> Custom Service'.

		Day Mode	Night Mode
PORT	1	Auto. Attend.	Auto. Attend.
PORT	2	Auto. Attend.	Auto. Attend.
PORT	3	Auto. Attend.	Auto. Attend.
PORT	4	Auto. Attend.	Auto. Attend.
PORT	5	Auto. Attend.	Auto. Attend.
PORT	6	Auto. Attend.	Auto. Attend.
PORT	7	Auto. Attend.	Auto. Attend.
PORT	8	Auto. Attend.	Auto. Attend.
PORT	9	Auto. Attend.	Auto. Attend.
PORT 10		Auto. Attend.	Auto. Attend.
PORT 11		Auto. Attend.	Auto. Attend.
PORT 12		Auto. Attend.	Auto. Attend.

A:Auto. Attend., V: Voice Mail, S: Next Screen Auto. Attend. (using Custom 1), Voice Mail (using Custom 2)

Incoming Call Services for all ports (Day/Night) can be defined by this setting. Default values for all ports (Day/Night) are "Automated Attendant Service (Custom 1)". To select other incoming call services, go to "Setting Ports".

6.Password Setting Screen output:

Quick Setup-Password Setting System Administrator Password (Maximum 10 characters)

NEW PASSWORD : =

VERIFICATION : = System Reset/Clear Password (Maximum 10 characters)

NEW PASSWORD : =

VERIFICATION : =

You can assign the System Administrator Password and System Reset/Clear Password in this screen, if necessary.

IMPORTANT

•We strongly recommend that you set the password to 10 characters for maximum protection against hackers.

•Do not carelessly reveal the password to other persons.

•Please change the password periodically (for instructions, see 7.2.3 Set Password (PASS) in 7.2 UTILITY COMMANDS.)

Installation Manual 111