Pioneer PDP-507XD manual Sleep Timer, Using a password AV mode only, Entering a password

11Useful Adjustment Settings

Sleep Timer

When the selected time elapses, the Sleep Timer automatically places the system into the standby mode.

1Press HOME MENU.

2Select “Sleep Timer” (/ then ENTER).

3Select the desired time (/ then ENTER).

•You can select from among “Off” (cancel), “30 min”, “60 min”, “90 min”, and “120 min”.

4Press HOME MENU to exit the menu.

NOTE

•Five minutes before the selected time elapses, the remaining time appears every minute.

•To check the remaining time, perform steps 1 and 2. After checking the time, press HOME MENU to restore the previous display.

Using a password (AV mode only)

The Plasma Television provides the Child Lock and Channel Lock functions for preventing children from watching inappropriate programmes. You need to enter a password when watching programmes with “Block” specified. Before the system is shipped, “1234” is preset as the factory-default password. You can however, change the password as you want.

When using the Home menu you select “Auto Installation”, “Analogue TV Setup”, “DTV Setup”, or “Password”, a screen prompting password entry appears to prevent others from changing the programme settings at their choices.

Entering a password

If you select a channel blocked with Child Lock or Channel Lock or if password entry is requested when attempting to open the menu, enter a password correctly.

1Enter a correct 4-digit password using buttons 0 to 9.

Please Input Your Password.

NOTE

•If you fail password entry three times, “Invalid password.” appears, and the menu is closed. In order to display the password entry screen again to unlock the password, select the blocked channel or open the menu again.

•If the password entry screen disappears before entry, you may recall it by pressing ENTER.

56

Changing the password

Use the following procedure to change the password.

1Press HOME MENU.

2Select “Setup” (/ then ENTER).

3Select “Password” (/ then ENTER).

•The password entry screen appears. Enter the current 4- digit password using buttons 0 to 9.

4Select “Change Password” (/ then ENTER).

Change Password

Please Input New Password.

Reconfirm New Password.

5Enter a 4-digit password to be newly set, using buttons 0 to 9.

6Enter the same password that you have entered in step 5.

•If an unmatching password is entered, the operation goes back to step 5 for reentry from the beginning.

•If you fail password change three times by entering unmatching passwords, the menu is closed.

7Press HOME MENU to exit the menu.

NOTE

• Take a note of the newly set password and keep it handy.

En