Pioneer PDP-507XD Useful Adjustment Settings, Switching the vertical drive frequency AV mode only

11Useful Adjustment Settings

52

Switching the vertical drive frequency (AV mode only)

You can switch the vertical drive frequency for screen display between 75 Hz and 100 Hz. Choose the drive frequency that better suits your broadcasting signals.

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “Drive Mode” (/ then ENTER).

4Select “75 Hz” or “100 Hz” (/ then ENTER).

Drive Mode

75Hz

100Hz

5Press HOME MENU to exit the menu.

NOTE

•This setting can be made for each input source separately.

•This setting cannot be made when 480i, 480p, 1080i@60 Hz, 720p@60 Hz, or 1080p@24 Hz signals are input.

•If you select “Auto” for “Side Mask” (page 55), the selection for “Drive Mode” becomes ineffective.

Adjusting image positions (AV mode only)

Adjust the horizontal and vertical positions of images on the Plasma Television.

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “Position” (/ then ENTER).

4Select “H/V Position Adjust” (/ then ENTER).

Position

H/V Position Adjust

Reset

5Adjust the vertical position (/) or the horizontal position (/).

6Press HOME MENU to exit the menu.

NOTE

•To restore the factory defaults for all items, press / to select “Reset” in step 4, and then press ENTER. A

confirmation screen appears. Press / to select “Yes”, and then press ENTER.

•Adjustments are stored separately according to input source.

•Depending on the displayed video, the image position may not change even after adjustment.

Adjusting image positions and clock automatically (PC mode only)

Use Auto Setup to automatically adjust the positions and clock of images coming from a personal computer.

1 Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “Auto Setup” (/ then ENTER).

Option

Auto Setup

Manual Setup

• Auto Setup starts.

4Press HOME MENU to exit the menu.

NOTE

•When Auto Setup is finished, “Auto Setup completed.” appears.

•Even when “Auto Setup completed” appears, Auto Setup may have failed, depending on conditions.

•Auto Setup may fail with a PC image composed of similar patterns or monochrome. If not successful, change the PC image and try again.

•Be sure to connect the computer to the Plasma Television and switch it on before starting Auto Setup.

Adjusting image positions and clock manually (PC mode only)

Usually you can easily adjust the positions and clock of images using Auto Setup. Use Manual Setup to optimize the positions and clock of images when necessary.

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “Manual Setup” (/ then ENTER).

4Select the item to be adjusted (/ then ENTER).

Manual Setup
H/V Position Adjust
Clock	0
Phase	0
Reset

5Perform adjustment (/ and /).

With “Clock” or “Phase” selected, you can perform adjustment in the parameter using /.

6Press HOME MENU to exit the menu.

NOTE

•To restore the factory defaults for all the items, press / to select “Reset” in step 4, and then press ENTER. A

confirmation screen appears. Press / to select “Yes”, and then press ENTER.

En