Pioneer PDP-507XD Installation Precautions, When using other items, Rear view PDP-607XD Side view

Safety Precautions

Installation Precautions

Observe the following precautions when installing with any items such as the optional stand.

When using the optional stand, brackets, or equivalent items

•Ask your dealer to perform the installation.

•Be sure to use the supplied bolts.

•For details, see the instruction manual that comes with the optional stand (or equivalent items).

When using other items

•Consult your dealer.

•The following six mounting holes can be used for the installation:

Rear view (PDP-607XD)		Side view
				Mounting surface
				Mounting
Mounting	Mounting	Plasma		bracket (or
hole	hole	Television		equivalent item)
	Median line			M8 screw
			12 mm to 18 mm

Median line

Rear view (PDP-507XD)

02

English

Mounting	Mounting
hole	hole	Median line

Median line

Rear view (PDP-427XD)

Mounting	Mounting
hole	hole

Median line

Median line

CAUTION

•Be sure to use four or more mounting holes symmetrical to the vertical and horizontal median lines.

•Use M8 screws, which go 12 mm to 18 mm in depth from the mounting surface of the Plasma Television. See the side view above.

•Be careful not to block the ventilation opening at the rear of the Plasma Television.

•Be sure to install the Plasma Television on a flat surface because it contains glass.

•The screw holes other than the above are to be used only for the specified products. Never use them for mounting non-specified products.

•Do not mount or remove the Plasma Television to or from the stand, with speakers attached.

NOTE

•It is strongly recommended to use the optional PIONEER mounting products.

•PIONEER shall not be liable for any personal injury or product damage that results from the use of mounting items other than

the optional PIONEER products. 11

En